Changelog¶
The format follows Keep a Changelog. Versions follow Semantic Versioning: a footprint change that moves a pad, hole or outline is a major version.
Unreleased¶
Added¶
- A documentation site, https://cameronbrooks11.github.io/cubesat-pc104-kicad/,
built from
docs/with MkDocs and published frommain: getting started, the templates, each part, the bus and SUCHAI pinouts (written from the same tables as the symbols), stack and mechanical notes, the breakout and development.just rendersdraws its pictures withkicad-cli;just docsbuilds it. The README is now an overview that links to it.
Changed¶
CSK_Buspins are named by their CubeSat Kit bus signal (IO.23,SDA_SYS,+5V_SYS,DGND, …) instead ofH1.1toH2.52, from the new tabletools/csk_bus_pins.csv(Pumpkin MBM 2 datasheet, 710-01362 rev E).SUCHAI_Payloadpins its table leaves unnamed take the same names. Pin numbers, electrical types and footprints are unchanged.CSK_Busis drawn wider (body half-width 10.16 mm, asSUCHAI_Payload) so the longer names fit; its pins move 2.54 mm outward. The templates and the breakout carry the new symbol. In an existing project, Update Symbols from Library moves the pins, so wires to them need reattaching.- The library's folder is
library/, formerlyKiCad/. A library table that points into a clone of this repository needs the new path; the release zips are unchanged.
1.0.0¶
First release. Everything is KiCad 10 and CERN-OHL-P-2.0.
Library (KiCad/)¶
CSK_PC104_Slot0andCSK_PC104_Slot1footprints: the CubeSat Kit base and extended board patterns (outline, H1/H2 headers, mounting holes; keepouts on Slot 0), generated from Pumpkin's 810-00253 rev B2 DXFs bytools/genfp.py.CSK_PC104_Busfootprint: the H1/H2 header pads alone, for a second bus connector.CSK_Bussymbol: the 104 bus pins as two units, H1 and H2.SUCHAI_Payloadsymbol: the SUCHAI 2 and 3 payload pinout on the same two units.
Templates (templates/)¶
CubeSat_PC104_Slot0andCubeSat_PC104_Slot1: KiCad project templates with the board outline, J1 on the bus, copper kept 1.27 mm from the edge and their own copy of the library.
Example board (breakout/)¶
CSK_Bus_Breakout: a 4-layer board carrying every bus pin from the stack position to a second H1/H2 header pair on the bottom, generated bytools/genbreakout.py.
Tooling¶
just check(CI): library copies, symbol and footprint generators, DRC with schematic parity and ERC on every board.just footprints: regenerate the footprints from the specification's DXFs and compare.just fabandjust dist: fabrication files and release assets.
Changed from the repository's earlier, unreleased state¶
- Relicensed from GPL-3.0 to CERN-OHL-P-2.0. SPEL's Eagle designs and the KiCad import of their stack breakout were removed; they remain in the git history under GPL-3.0.