Tower Module Reference

Parameter reference for all five calibration tower generators.


generate_flow_tower

File: src/flowtower.scad Example: examples/flowtower_examples/flowtower_example.scad

Extrusion multiplier / flow rate calibration tower. Each section is a hollow cube with a cylindrical through-hole and a connector ramp to the next section.

include <src/flowtower.scad>;
generate_flow_tower(starting_value = 115, ending_value = 85, value_change = -5);
Parameter Default Description
tower_label "" Label inscribed on the base
tower_secondary_label "" Secondary label inscribed on the base
section_label_prefix "" Text prepended to each section value
section_label_suffix "" Text appended to each section value
starting_value 115 First section value
ending_value 85 Last section value
value_change -5 Step between sections (sign auto-corrected)
base_height 0.841 Height of the flat base (mm)
section_size 8.401 Width, depth, and height of each section (mm)
section_hole_diameter 4.201 Diameter of the through-hole per section (mm)
font "Arial:style=Bold" Font for all labels
label_sections true Carve value into each section
section_label_height_multiplier 0.401 Largest section label font size, as a fraction of section_size; a label shrinks to fit its face
tower_label_height_multiplier 0.601 Tower label font size as fraction of section_size
tower_secondary_label_height_multiplier 0.401 Secondary label font size as fraction of section_size
wall_thickness 0.601 Wall thickness (mm)
iota 0.001 Z-fighting offset

generate_temp_tower

File: src/temptower.scad Example: examples/temptower_examples/temptower_example.scad

Temperature calibration tower. Each section has two hollow square columns bridged at the top with angled and curved supports to test bridging quality.

include <src/temptower.scad>;
generate_temp_tower(starting_value = 220, ending_value = 180, value_change = -5);
Parameter Default Description
tower_label "" Label inscribed along the left side
column_label "" Label inscribed on the right column face
section_label_prefix "" Text prepended to each section value
section_label_suffix "" Text appended to each section value
starting_value 220 First section value
ending_value 180 Last section value
value_change -5 Step between sections (sign auto-corrected)
base_height 0.801 Height of the flat base (mm)
section_height 8.001 Height of each section (mm)
font "Arial:style=Bold" Font for all labels
label_sections true Carve value into each section
section_label_height_multiplier 0.401 Largest section label font size, as a fraction of section_height; a label shrinks to fit its face
tower_label_height_multiplier 0.601 Tower label font size as fraction of section_height
column_label_height_multiplier 0.301 Column label font size as fraction of section_height
wall_thickness 0.601 Wall thickness (mm)
tower_width_multiplier 5.001 Tower width as multiple of section_height
iota 0.001 Z-fighting offset

generate_temp_tower_detailed

File: src/temptower_detailed.scad Example: examples/temptower_examples/temptower_detailed_example.scad

Detailed temperature tower with complex section geometry: sloped end pieces, a curved left compartment, and a right compartment with conical spikes. Tests overhangs, curves, and fine detail at each temperature.

include <src/temptower_detailed.scad>;
generate_temp_tower_detailed(starting_value = 220, ending_value = 180, value_change = -5);
Parameter Default Description
tower_label "" Label inscribed on the base
section_label_prefix "" Text prepended to each section value
section_label_suffix "" Text appended to each section value
starting_value 220 First section value
ending_value 180 Last section value
value_change -5 Step between sections (sign auto-corrected)
base_height 0.801 Height of the flat base (mm)
section_height 8.001 Height of each section (mm)
wall_thickness 0.601 Wall thickness (mm)
font "Arial:style=Bold" Font for all labels
label_sections true Carve value into each section
base_extension 2.404 Base overhang beyond section outline (mm)
left_slope_angle 35 Left slope end angle (degrees)
right_slope_angle 45 Right slope end angle (degrees)
section_label_height_multiplier 0.401 Section label font size as fraction of section_height
iota 0.001 Z-fighting offset

generate_retract_tower

File: src/retracttower.scad Example: examples/retracttower_examples/retracttower_example.scad

Retraction distance calibration tower. Each section has a hollow square column on the left and a hollow round column on the right.

include <src/retracttower.scad>;
generate_retract_tower(starting_value = 1.0, ending_value = 6.0, value_change = 1.0);
Parameter Default Description
tower_label "" Label inscribed along the left side
column_label "" Label wrapped around the right round column
section_label_prefix "" Text prepended to each section value
section_label_suffix "" Text appended to each section value
starting_value 1.0 First section value (mm)
ending_value 6.0 Last section value (mm)
value_change 1.0 Step between sections (sign auto-corrected)
base_height 0.801 Height of the flat base (mm)
section_height 8.001 Height of each section (mm)
font "Arial:style=Bold" Font for all labels
label_sections true Carve value into each section
section_label_height_multiplier 0.401 Largest section label font size, as a fraction of section_height; a label shrinks to fit its face
tower_label_height_multiplier 0.601 Tower label font size as fraction of section_height
column_label_height_multiplier 0.301 Column label font size as fraction of section_height
column_label_letter_spacing_multiplier 1.001 Letter spacing for the curved column label
wall_thickness 0.601 Wall thickness (mm)
tower_width_multiplier 5.001 Tower width as multiple of section_height
iota 0.001 Z-fighting offset

generate_speed_tower

File: src/speedtower.scad Example: examples/speedtower_examples/speedtower_example.scad

Print speed calibration tower with an L-shaped cross-section covering both X and Y axes. Each section has front circular cutouts and rear rectangular cutouts to test bridging and overhangs at each speed.

include <src/speedtower.scad>;
generate_speed_tower(starting_speed_value = 20, ending_speed_value = 100, speed_value_change = 20);
Parameter Default Description
tower_label "" Label inscribed on the base
tower_description "" Secondary label inscribed on the base
starting_speed_value 20 First section speed (mm/s)
ending_speed_value 100 Last section speed (mm/s)
speed_value_change 20 Step between sections (sign auto-corrected)
wing_length 50.001 Length of each wing (mm)
wing_thickness 3.001 Thickness of each wing (mm)
base_height 0.841 Height of the flat base (mm)
section_height 8.401 Height of each section (mm)
base_font_size 2.001 Font size for base axis labels (mm)
hide_labels false Suppress all label inscriptions
font "Arial:style=Bold" Font for all labels
wall_thickness 0.4001 Wall thickness (mm)
section_font_height_multiplier 0.333 Section label height as fraction of section_height
inscription_depth 0.201 Depth of all inscriptions (mm)
iota 0.001 Z-fighting offset

This site uses Just the Docs, a documentation theme for Jekyll.