Examples

bedlevelpattern_examples

Circle in square bed level pattern

A circle inside a square outline, across 90% of a 220 x 220 mm bed.

Source: examples/bedlevelpattern_examples/blp_circle_in_square_example.scad
// Circle in square bed level pattern
// A circle inside a square outline, across 90% of a 220 x 220 mm bed.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "circle in square";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage
);

examples/bedlevelpattern_examples/blp_circle_in_square_example.scad on GitHub

Concentric circles bed level pattern

Seven single-line rings across 90% of a 220 x 220 mm bed.

Source: examples/bedlevelpattern_examples/blp_concentric_circles_example.scad
// Concentric circles bed level pattern
// Seven single-line rings across 90% of a 220 x 220 mm bed.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "concentric circles";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
concentric_ring_count = 7;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, concentric_ring_count=concentric_ring_count
);

examples/bedlevelpattern_examples/blp_concentric_circles_example.scad on GitHub

Concentric squares bed level pattern

Seven nested square outlines across 90% of a 220 x 220 mm bed.

Source: examples/bedlevelpattern_examples/blp_concentric_squares_example.scad
// Concentric squares bed level pattern
// Seven nested square outlines across 90% of a 220 x 220 mm bed.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "concentric squares";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
concentric_ring_count = 7;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, concentric_ring_count=concentric_ring_count
);

examples/bedlevelpattern_examples/blp_concentric_squares_example.scad on GitHub

Five circles bed level pattern

Filled circles at the centre and in each corner, joined by a curved outline.

Source: examples/bedlevelpattern_examples/blp_five_circles_example.scad
// Five circles bed level pattern
// Filled circles at the centre and in each corner, joined by a curved outline.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "five circles";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
circle_diameter = 20;
outline_distance = 5;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, circle_diameter=circle_diameter, outline_distance=outline_distance
);

examples/bedlevelpattern_examples/blp_five_circles_example.scad on GitHub

Grid bed level pattern

A 4 x 4 grid of single lines across 90% of a 220 x 220 mm bed.

Source: examples/bedlevelpattern_examples/blp_grid_example.scad
// Grid bed level pattern
// A 4 x 4 grid of single lines across 90% of a 220 x 220 mm bed.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "grid";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
grid_cell_count = 4;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, grid_cell_count=grid_cell_count
);

examples/bedlevelpattern_examples/blp_grid_example.scad on GitHub

Padded grid bed level pattern

A 4 x 4 grid with a square pad at every intersection.

Source: examples/bedlevelpattern_examples/blp_padded_grid_example.scad
// Padded grid bed level pattern
// A 4 x 4 grid with a square pad at every intersection.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "padded grid";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
grid_cell_count = 4;
grid_pad_size = 10.001;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, grid_cell_count=grid_cell_count, grid_pad_size=grid_pad_size
);

examples/bedlevelpattern_examples/blp_padded_grid_example.scad on GitHub

Any bed level pattern

All eight patterns in one file: pick one, and set its parameters, in the Customizer.

Source: examples/bedlevelpattern_examples/blp_showcase_example.scad
// Any bed level pattern
// All eight patterns in one file: pick one, and set its parameters, in the Customizer.

include <../../src/bedlevelpattern.scad>;

/* [Pattern] */
bed_level_pattern_type = "concentric squares"; // [concentric squares, spiral squares, concentric circles, x in square, circle in square, grid, padded grid, five circles]

/* [Print area] */
print_area_width = 220.001;
print_area_depth = 220.001;
// Share of the print area the pattern covers (%)
fill_percentage = 90; // [50:100]

/* [Lines] */
line_width = 0.401;
line_height = 0.301;

/* [Concentric and spiral patterns] */
concentric_ring_count = 7;

/* [Grid patterns] */
grid_cell_count = 4;
// Side of each pad on the padded grid
grid_pad_size = 10.001;

/* [Five circles] */
circle_diameter = 20;
outline_distance = 5;

/* [Quality] */
quality_value = 128;

$fn = quality_value;

generate_bed_level_pattern(
  bed_level_pattern_type=bed_level_pattern_type, print_area_width=print_area_width,
  print_area_depth=print_area_depth, line_width=line_width, line_height=line_height,
  fill_percentage=fill_percentage, concentric_ring_count=concentric_ring_count,
  grid_cell_count=grid_cell_count, grid_pad_size=grid_pad_size, circle_diameter=circle_diameter,
  outline_distance=outline_distance
);

examples/bedlevelpattern_examples/blp_showcase_example.scad on GitHub

Spiral squares bed level pattern

One continuous square spiral of seven turns across 90% of a 220 x 220 mm bed.

Source: examples/bedlevelpattern_examples/blp_spiral_squares_example.scad
// Spiral squares bed level pattern
// One continuous square spiral of seven turns across 90% of a 220 x 220 mm bed.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "spiral squares";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
concentric_ring_count = 7;
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage, concentric_ring_count=concentric_ring_count
);

examples/bedlevelpattern_examples/blp_spiral_squares_example.scad on GitHub

X in square bed level pattern

Corner-to-corner diagonals inside a square outline.

Source: examples/bedlevelpattern_examples/blp_x_in_square_example.scad
// X in square bed level pattern
// Corner-to-corner diagonals inside a square outline.

include <../../src/bedlevelpattern.scad>;

// Parameters
bed_level_pattern_type = "x in square";
print_area_width = 220.001;
print_area_depth = 220.001;
line_width = 0.401;
line_height = 0.301;
fill_percentage = 90; // Range: [50:100]
quality_value = 128;

$fn = quality_value;

// Generate the pattern
generate_bed_level_pattern(
  bed_level_pattern_type, print_area_width, print_area_depth, line_width, line_height,
  fill_percentage
);

examples/bedlevelpattern_examples/blp_x_in_square_example.scad on GitHub

flowtower_examples

Flow tower

Hollow sections labelled 115 down to 85 in steps of 5, to choose a flow rate.

Source: examples/flowtower_examples/flowtower_example.scad
// Flow tower
// Hollow sections labelled 115 down to 85 in steps of 5, to choose a flow rate.

include <../../src/flowtower.scad>;

/* [User Parameters] */

// Set your desired parameters here
tower_label = "Flow Tower";
tower_secondary_label = "Calibration";
section_label_prefix = "";
section_label_suffix = "%";
starting_value = 115;
ending_value = 85;
value_change = -5;
base_height = 0.841;
section_size = 8.401;
section_hole_diameter = 4.201;
font = "Arial:style=Bold";
label_sections = true;
section_label_height_multiplier = 0.401;
tower_label_height_multiplier = 0.601;
tower_secondary_label_height_multiplier = 0.401;
wall_thickness = 0.601;
iota = 0.001;
orient_for_screenshot = false;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Flow Tower] */

generate_flow_tower(
  tower_label=tower_label,
  tower_secondary_label=tower_secondary_label,
  section_label_prefix=section_label_prefix,
  section_label_suffix=section_label_suffix,
  starting_value=starting_value,
  ending_value=ending_value,
  value_change=value_change,
  base_height=base_height,
  section_size=section_size,
  section_hole_diameter=section_hole_diameter,
  font=font,
  label_sections=label_sections,
  section_label_height_multiplier=section_label_height_multiplier,
  tower_label_height_multiplier=tower_label_height_multiplier,
  tower_secondary_label_height_multiplier=tower_secondary_label_height_multiplier,
  wall_thickness=wall_thickness,
  iota=iota,
  orient_for_screenshot=orient_for_screenshot
);

examples/flowtower_examples/flowtower_example.scad on GitHub

retracttower_examples

Retraction tower

A square and a round column in sections from 1 to 6 mm of retraction, in 1 mm steps.

Source: examples/retracttower_examples/retracttower_example.scad
// Retraction tower
// A square and a round column in sections from 1 to 6 mm of retraction, in 1 mm steps.

include <../../src/retracttower.scad>;

/* [User Parameters] */

// Set your desired parameters here
tower_label = "";
column_label = "";
section_label_prefix = "";
section_label_suffix = "mm";
starting_value = 1.0;
ending_value = 6.0;
value_change = 1.0;
base_height = 0.801;
section_height = 8.001;
font = "Arial:style=Bold";
label_sections = true;
section_label_height_multiplier = 0.401;
tower_label_height_multiplier = 0.601;
column_label_height_multiplier = 0.301;
column_label_letter_spacing_multiplier = 1.001;
wall_thickness = 0.601;
tower_width_multiplier = 5.001;
iota = 0.001;
orient_for_screenshot = false;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Retract Tower] */

generate_retract_tower(
  tower_label=tower_label,
  column_label=column_label,
  section_label_prefix=section_label_prefix,
  section_label_suffix=section_label_suffix,
  starting_value=starting_value,
  ending_value=ending_value,
  value_change=value_change,
  base_height=base_height,
  section_height=section_height,
  font=font,
  label_sections=label_sections,
  section_label_height_multiplier=section_label_height_multiplier,
  tower_label_height_multiplier=tower_label_height_multiplier,
  column_label_height_multiplier=column_label_height_multiplier,
  column_label_letter_spacing_multiplier=column_label_letter_spacing_multiplier,
  wall_thickness=wall_thickness,
  tower_width_multiplier=tower_width_multiplier,
  iota=iota,
  orient_for_screenshot=orient_for_screenshot
);

examples/retracttower_examples/retracttower_example.scad on GitHub

speedtower_examples

Speed tower

An L-shaped tower in sections from 20 to 100 mm/s, in 20 mm/s steps.

Source: examples/speedtower_examples/speedtower_example.scad
// Speed tower
// An L-shaped tower in sections from 20 to 100 mm/s, in 20 mm/s steps.

include <../../src/speedtower.scad>;

/* [User Parameters] */

// Set your desired parameters here
tower_label = "Speed Tower";
tower_description = "Calibration";
starting_speed_value = 20;
ending_speed_value = 100;
speed_value_change = 20;
wing_length = 50.001;
wing_thickness = 3.001;
base_height = 0.841;
section_height = 8.401;
base_font_size = 2.001;
hide_labels = false;
font = "Arial:style=Bold";
section_label_height_multiplier = 0.401;
wall_thickness = 0.4001;
section_font_height_multiplier = 0.333;
inscription_depth = 0.201;
iota = 0.001;
orient_for_screenshot = false;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Speed Tower] */

generate_speed_tower(
  tower_label=tower_label,
  tower_description=tower_description,
  starting_speed_value=starting_speed_value,
  ending_speed_value=ending_speed_value,
  speed_value_change=speed_value_change,
  wing_length=wing_length,
  wing_thickness=wing_thickness,
  base_height=base_height,
  section_height=section_height,
  base_font_size=base_font_size,
  hide_labels=hide_labels,
  font=font,
  section_label_height_multiplier=section_label_height_multiplier,
  wall_thickness=wall_thickness,
  section_font_height_multiplier=section_font_height_multiplier,
  inscription_depth=inscription_depth,
  iota=iota,
  orient_for_screenshot=orient_for_screenshot
);

examples/speedtower_examples/speedtower_example.scad on GitHub

temptower_examples

Detailed temperature tower

Sections from 220 down to 180 degrees C in 5 degree steps, each with overhangs, cones and a bridge.

Source: examples/temptower_examples/temptower_detailed_example.scad
// Detailed temperature tower
// Sections from 220 down to 180 degrees C in 5 degree steps, each with overhangs, cones and a bridge.

include <../../src/temptower_detailed.scad>;

/* [User Parameters] */

// Set your desired parameters here
tower_label = "Temp Tower";
section_label_prefix = "";
section_label_suffix = "C";
starting_value = 220;
ending_value = 180;
value_change = -5;
base_height = 0.801;
section_height = 8.001;
wall_thickness = 0.601;
font = "Arial:style=Bold";
label_sections = true;
base_extension = 2.404;
left_slope_angle = 35;
right_slope_angle = 45;
section_label_height_multiplier = 0.401;
iota = 0.001;
orient_for_screenshot = false;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Detailed Temp Tower] */

generate_temp_tower_detailed(
  tower_label=tower_label,
  section_label_prefix=section_label_prefix,
  section_label_suffix=section_label_suffix,
  starting_value=starting_value,
  ending_value=ending_value,
  value_change=value_change,
  base_height=base_height,
  section_height=section_height,
  wall_thickness=wall_thickness,
  font=font,
  label_sections=label_sections,
  base_extension=base_extension,
  left_slope_angle=left_slope_angle,
  right_slope_angle=right_slope_angle,
  section_label_height_multiplier=section_label_height_multiplier,
  iota=iota,
  orient_for_screenshot=orient_for_screenshot
);

examples/temptower_examples/temptower_detailed_example.scad on GitHub

Temperature tower

Bridged sections from 220 down to 180 degrees C in 5 degree steps, each labelled.

Source: examples/temptower_examples/temptower_example.scad
// Temperature tower
// Bridged sections from 220 down to 180 degrees C in 5 degree steps, each labelled.

include <../../src/temptower.scad>;

/* [User Parameters] */

// Set your desired parameters here
tower_label = "Temp Tower";
column_label = "";
section_label_prefix = "";
section_label_suffix = "C";
starting_value = 220;
ending_value = 180;
value_change = -5;
base_height = 0.801;
section_height = 8.001;
font = "Arial:style=Bold";
label_sections = true;
section_label_height_multiplier = 0.401;
tower_label_height_multiplier = 0.601;
column_label_height_multiplier = 0.301;
wall_thickness = 0.601;
tower_width_multiplier = 5.001;
iota = 0.001;
orient_for_screenshot = false;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Temp Tower] */

generate_temp_tower(
  tower_label=tower_label,
  column_label=column_label,
  section_label_prefix=section_label_prefix,
  section_label_suffix=section_label_suffix,
  starting_value=starting_value,
  ending_value=ending_value,
  value_change=value_change,
  base_height=base_height,
  section_height=section_height,
  font=font,
  label_sections=label_sections,
  section_label_height_multiplier=section_label_height_multiplier,
  tower_label_height_multiplier=tower_label_height_multiplier,
  column_label_height_multiplier=column_label_height_multiplier,
  wall_thickness=wall_thickness,
  tower_width_multiplier=tower_width_multiplier,
  iota=iota,
  orient_for_screenshot=orient_for_screenshot
);

examples/temptower_examples/temptower_example.scad on GitHub

torture_test_examples

Torture test

An 80 mm cube of bars stood on one corner on a round base.

Source: examples/torture_test_examples/torture_test_example.scad
// Torture test
// An 80 mm cube of bars stood on one corner on a round base.

include <../../src/torture_test.scad>;

/* [User Parameters] */

// The thickness of bars in the model
bar_thickness = 5;

// The overall size of the cube
cube_length = 80;

// The thickness of the base
base_thickness = 4;

// The base diameter as a proportion of cube_length
base_scale = 1.1;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 32;
render_quality_value = 64; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the Torture Test] */

generate_torture_test(
  bar_thickness=bar_thickness,
  cube_length=cube_length,
  base_thickness=base_thickness,
  base_scale=base_scale
);

examples/torture_test_examples/torture_test_example.scad on GitHub

xyzcalicube_examples

XYZ calibration cube

A 20 mm cube with X, Y and Z cut into its faces, to measure each axis.

Source: examples/xyzcalicube_examples/xyzcalicube_example.scad
// XYZ calibration cube
// A 20 mm cube with X, Y and Z cut into its faces, to measure each axis.

include <../../src/xyzcalicube.scad>;

/* [User Parameters] */

// The size of the calibration cube
cube_size = 20;

/* [Quality Settings] */

// Set the rendering quality
preview_quality_value = 24;
render_quality_value = 48; // Increase for higher detail

$fn = $preview ? preview_quality_value : render_quality_value;

/* [Generate the XYZ Calibration Cube] */

generate_xyz_cali_cube(
  cube_size=cube_size
);

examples/xyzcalicube_examples/xyzcalicube_example.scad on GitHub


This site uses Just the Docs, a documentation theme for Jekyll.