Examples
mounting
Adaptor
Glued into the bottom of a shade; it sits on the lamp’s ~28 mm threaded shade ring.
Source: examples/mounting/adaptor.scad
// Adaptor
// Glued into the bottom of a shade; it sits on the lamp's ~28 mm threaded shade ring.
include <../../adaptor/adaptor.scad>
examples/mounting/adaptor.scad on GitHub
Low-profile base
A spoked disc with the light fitting’s mount built in, and holes round its rim for the feet.
Source: examples/mounting/base.scad
// Low-profile base
// A spoked disc with the light fitting's mount built in, and holes round its rim for the feet.
include <../../bases/low_pro_with_adaptor.scad>
examples/mounting/base.scad on GitHub
Low-profile foot
A bullet-shaped foot, fixed into a hole with a threaded insert or a self-tapping screw.
Source: examples/mounting/foot.scad
// Low-profile foot
// A bullet-shaped foot, fixed into a hole with a threaded insert or a self-tapping screw.
include <../../feet/low_profile_foot.scad>
examples/mounting/foot.scad on GitHub
other-designers
Gyro lamp shade
Nested rings that swing like a gyroscope, by Harald Andersson, laid out for printing. CC BY-NC-SA 4.0.
Source: examples/other-designers/gyro_shade.scad
// Gyro lamp shade
// Nested rings that swing like a gyroscope, by Harald Andersson, laid out for printing. CC BY-NC-SA 4.0.
include <../../gyro-shade/gyro_lamp_shade.scad>
highResolution = true;
renderMode = 1;
examples/other-designers/gyro_shade.scad on GitHub
Lamp shade generator
Segments of twisted twigs, by seasick. CC BY 4.0.
Source: examples/other-designers/shade_generator.scad
// Lamp shade generator
// Segments of twisted twigs, by seasick. CC BY 4.0.
include <../../shade-generator/lamp-generator.scad>
examples/other-designers/shade_generator.scad on GitHub
shades
Double rotated octagon
An octagon twisted a half-turn up the shade, with a mirror copy twisted the other way. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/double_rotated_octagon.scad
// Double rotated octagon
// An octagon twisted a half-turn up the shade, with a mirror copy twisted the other way. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../double_rotated_octagon/rotated_octogon_small.scad>
layer_height = 2;
examples/shades/double_rotated_octagon.scad on GitHub
Double rotated pentagon
Two pentagons twisting in opposite directions. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/double_rotated_pentagon.scad
// Double rotated pentagon
// Two pentagons twisting in opposite directions. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../double_rotated_pentagon/double_rotated_pentagon_small.scad>
layer_height = 2;
examples/shades/double_rotated_pentagon.scad on GitHub
Fish tail
Heptagon strands braided in two directions around a swelling body. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/fish_tail.scad
// Fish tail
// Heptagon strands braided in two directions around a swelling body. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../fish_tail/fish_tail_small.scad>
layer_height = 2;
examples/shades/fish_tail.scad on GitHub
Golfball
A swelling body covered in dimples. The small size, previewed with 2 mm layers and half as many, larger dimples each way so it loads quickly: print golfball/golfball_small.scad.
Source: examples/shades/golfball.scad
// Golfball
// A swelling body covered in dimples. The small size, previewed with 2 mm layers and half as many, larger dimples
// each way so it loads quickly: print golfball/golfball_small.scad.
include <../../golfball/golfball_small.scad>
layer_height = 2;
dimple_v_spacing = 12;
num_dimple_per_rot = 25;
examples/shades/golfball.scad on GitHub
Noise
A low-poly body generated by noise/noisey_generator.py, which writes noise/noisey.scad.
Source: examples/shades/noise.scad
// Noise
// A low-poly body generated by noise/noisey_generator.py, which writes noise/noisey.scad.
include <../../noise/noisey.scad>
examples/shades/noise.scad on GitHub
Pineapple
Rings of triangles that interlock into a diamond lattice, like the skin of a pineapple. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/pineapple.scad
// Pineapple
// Rings of triangles that interlock into a diamond lattice, like the skin of a pineapple. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../pineapple/pineapple_small.scad>
layer_height = 2;
examples/shades/pineapple.scad on GitHub
Rope swirl
Decagon strands spiralling round each other like a rope. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/rope_swirl.scad
// Rope swirl
// Decagon strands spiralling round each other like a rope. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../rope_swirl/rope_swirl_small.scad>
layer_height = 2;
examples/shades/rope_swirl.scad on GitHub
Rotated star
Two triangles twisting in opposite directions, making a six-pointed star. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/rotated_star.scad
// Rotated star
// Two triangles twisting in opposite directions, making a six-pointed star. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../rotated_star/rotated_star_small.scad>
layer_height = 2;
examples/shades/rotated_star.scad on GitHub
Screw compressor
Three hexagon lobes twisting up the shade. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/screw_compressor.scad
// Screw compressor
// Three hexagon lobes twisting up the shade. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../screw_compressor/screw_compressor_small.scad>
layer_height = 2;
examples/shades/screw_compressor.scad on GitHub
Triple spring
Three round lobes winding up the shade, swelling at the middle. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/triple_spring.scad
// Triple spring
// Three round lobes winding up the shade, swelling at the middle. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../triple_spring/triple_spring_small.scad>
layer_height = 2;
examples/shades/triple_spring.scad on GitHub
Turbine
Three pentagon blades twisting up the shade. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
Source: examples/shades/turbine.scad
// Turbine
// Three pentagon blades twisting up the shade. The small size, with 2 mm layers so it renders quickly: print at 0.2 mm.
include <../../turbine/turbine_small.scad>
layer_height = 2;