stackable-drying-rack
A modular drying rack in OpenSCAD. Each unit is a hexagonal basin with a drainage grid of hexagonal holes. Basins dovetail together edge to edge into a tray of any size, and rods through the six corner bores stack trays into levels, with air between them.

Make one
rack.scad renders one basin by default. Its parameters, at the top of the file:
basin_diameter(150 mm),basin_height(8 mm),basin_thickness(2.4 mm): the basin. The diameter is across the hexagon’s corners, measured to the middle of the wall.basin_grid_diameter(5 mm),basin_grid_spacing(1 mm): the drainage holes and the webs between them.rod_bore_diameter(5 mm): the corner bores, countersunk from both faces so a rod friction-fits.layout_basins,rows,cols: lay out arowsxcolstray to preview it. The console reports the tray’s footprint.show_row_rods: draw the rods, to check the stacking.
Every basin has dovetail tabs on three alternate edges, two per edge at the default size, and matching slots on the other three, 0.2 mm larger than the tabs each way, so any two basins join.
It needs the tessella library at v0.1.0, which scadman.lock
pins. With scadman installed:
scadman run rack.scad -o rack.stl # or: scadman sync, then add the folder `scadman env` prints to OPENSCADPATH
Without scadman, clone tessella at that tag into your OpenSCAD libraries folder:
git clone --branch v0.1.0 https://github.com/CameronBrooks11/tessella.git
just test renders the basin and 1x2, 2x1 and 2x2 trays, and checks that neighbouring basins meet with their tabs
in each other’s slots and no overlap.
Printing
The first basin was printed on a Prusa XL with a 0.4 mm nozzle, PrusaSlicer 2.9.1:
- profile: 0.20mm SPEED @XLIS 0.4
- filament: Generic PETG, 240 °C, bed 80 °C
- 0.2 mm layers, 3 perimeters, 3 bottom and 5 top solid layers
- 10 % gyroid infill, supports on
The print files were removed from the repository; render rack.scad and slice it with these settings.
Licence
MIT.