screw-sorter

A stack of 3D-printed sieves for sorting a jumble of screws by size. Each tray is a round sieve with a different hole size; a holder ring sits between trays so they stack, coarsest on top. Shake the stack and each screw stops on the first tray whose holes it can’t pass through.

Made out of dire need, in OpenSCAD.

A sieve tray (green) sitting in its holder ring (blue)

Make one

Open screw_sorter.scad in OpenSCAD and use the Customizer:

  • Render control: sieve for a tray, holder for a ring, all for both.
  • Gap size: the hole size, which sets what passes through.
  • Outer diameter, strand width and height, rim thickness and height, taper: the tray itself.
  • Holder allowances: the clearances between a tray and its holder, and between holders, so they fit after printing.

The sorter is round only. examples/sieve.scad and examples/holder.scad render the default tray and holder.

Printing a set

just batch renders the set printed in 2025 into batch/: ten 120 mm trays with gaps of 1 mm to 10 mm, and the holder. They were printed on a Prusa XL with a 0.4 mm nozzle, five trays to a plate, in PrusaSlicer 2.9.0:

  • profile: 0.10mm FAST DETAIL @XLIS 0.4
  • filament: Generic PLA, 220 °C, bed 60 °C
  • 0.1 mm layers, 3 perimeters, 7 bottom and 8 top solid layers
  • 15 % grid infill; supports off for the trays, on for the holder

prints/ holds the first test prints from January 2025: three trays with 3, 5 and 8 mm gaps and a holder, with their PrusaSlicer projects. They came from an earlier version of the design that is no longer in this repository, so they don’t match what screw_sorter.scad renders now.

How it’s built

The trays come from a customizable sieve by DrLex, kept in lib/sieve.scad with two additions for this sorter: a stacking rim on the sieve, and stackable_sieve_holder(), the ring that holds one tray and stacks on the next. The library is included here so the sorter needs nothing else installed.

Licence and credit

CC BY-SA 4.0, the terms of the sieve this is built on.

  • Sieve: Customizable sieve by DrLex (Alexander Thomas) and contributors, formerly Thingiverse thing:2578935, itself based on Sieve by pcstru.
  • Stacking rim, holder and sorter: Cameron K. Brooks.

This site uses Just the Docs, a documentation theme for Jekyll.