Skip to content

cubesat-pc104-kicad

KiCad parts and boards for CubeSat Kit modules on the PC/104 form factor: two 2×26 stack headers (H1 and H2) and four mounting holes on a 90.17 mm × 95.89 mm board.

Slot 0 template, top view Bus breakout, top view

The footprints are generated from, and checked against, Pumpkin's CubeSat Kit PCB Specification (810-00253 rev B2). The symbols name every pin by its CubeSat Kit bus signal. Two project templates and a finished 4-layer example board are built from the library, and each passes DRC and ERC in KiCad 10.

What is here

Page What it covers
Library The CubeSat_PC104 symbol and footprint library: both board patterns, a bare bus connector, the bus symbol and the SUCHAI payload symbol.
Templates Two KiCad project templates, one per board pattern: start a module from one and wire the pins you use.
Bus breakout A finished board that carries every bus pin to a second connector on the bottom, with fabrication files ready to order.
Bus pinout The signal on each of the 104 bus pins.

Start here

Everything needs KiCad 10 and is tested with 10.0.6. Downloads are on the releases page.

Credits and licence

The SUCHAI payload pinout is from SPEL at the Universidad de Chile, spel-uchile/Payload-PC104 (matvidal, EliasObreque and Alex Becerra, 2018 to 2022). This project began as a KiCad import of their Eagle stack breakout; that board and the Eagle files were removed when the library, templates and breakout were redone, and remain in the repository's history under SPEL's GPL-3.0.

The CubeSat Kit is Pumpkin, Inc.'s. PC/104 is a standard of the RMS Consortium, formerly the PC/104 Consortium. This project is not affiliated with either.

The library, templates and breakout are under CERN-OHL-P-2.0, a permissive open-hardware licence: use and modify them in your own boards, open or closed, without sharing your design, and keep the licence notice with any copy of these files.